Login: GUEST @ JH4XSY.14.JNET1.JPN.AS [Tsuchiura]
home | newest check | boards | help index | log | ps | userlogin | send sysop | slog | status forward | bcm news | users | version | remove cookiePA2SNK > BAYCOM 10.02.25 06:32l 26 Lines 875 Bytes #86 (0) @ WW BID : 6220-PA2SNK Read: JH4XSY Subj: Uscc in xrouter Path: JH4XSY<N3HYM<PD0LPM Sent: 250209/2124Z @:PD0LPM.#FRL.NLD.EURO #:35933 [Joure] $:6220-PA2SNK From: PA2SNK@PD0LPM.#FRL.NLD.EURO To : BAYCOM@WW ﾍﾍ[Message No. 1217 Send on 09-02-2025 at 22:24:03 Lt by PA2SNK Danny]ﾍﾍﾍﾍﾍﾍﾍﾍ Tsthost MsgFilter v1.06c-OlnSoft ﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄﾄｶToplogo creator (c) 1997-1998 by PD0OLNｺﾄﾄﾄﾄﾄﾄ Did anyone manage to get a uscc card to work ok in Xrouter? I have used a dds escc card(pa0hzp) in xrouter and that worked good in the past. The setup is pretty mutch the same as with an hzp card. I only can get one port (the first) to work out of 4. Tested the card in bpq and than it works ok. Have made 4 interfaces channel 1 - 4 And 2 ports as i only use 2. With channel a for the first port and of course channel=d for the last. What could go wrong ? 73 de Danny PA2SNK ﾍﾍ[Pc:Lenovo x64 Tnc:Kenwood Trx:Kenwood THD72 Ant:Rubber duck]ﾍﾍﾍﾍﾍﾍﾍﾍ ﾍﾍ[PA2SNK@PD0LPM.#FRL.NLD.EURO Sneek,Friesland JO23TA Holland]ﾍﾍﾍﾍﾍﾍﾍﾍﾍ /ACK
前のメール | 次のメール