Login: GUEST @ JH4XSY.14.JNET1.JPN.AS [Tsuchiura]
home | newest check | boards | help index | log | ps | userlogin | send sysop | slog | status forward | bcm news | users | version | remove cookie
G8MNY > ATV 21.08.25 18:13l 62 Lines 2571 Bytes #22 (0) @ WW
BID : 39243_GB7CIP
Read: GUEST
Subj: SCART Video Connections
Path: JH4XSY<N3HYM<VE3CGR<VK2IO<VK6HGR<GB7CIP
Sent: 250821/0907Z @:GB7CIP.#32.GBR.EURO #:39243 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : ATV@WW
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
Not all pins have to be connected. There are different standards....
Type U (universal) - provides connections to all 21 pins.
Type V (video) - provides all connections excluding audio pins (3,1,6,2&4).
Type C ( composite video & audio ) - provides all connections excluding
RGB Video & Blanking pins (15,13,11,9,7,5,16&18).
Type A (audio) - provides all connections excluding Video pins
(19,20,17,15,13,11,9,7,5,16&18)
________________________________
SOCKET \ 20 18 16 14 12 10 8 6 4 2 ³
VIEW 21³ 19 17 15 13 11 9 7 5 3 1³
ĄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄŁ
Pin Name Description Size of Signal Impedance
1 AOR Audio Out Right 0.5V RMS <1kź
2 AIR Audio In Right 0.5V RMS >10kź
3 AOL Audio Out Left + Mono 0.5V RMS <1kź
4 AGND Audio Ground
5 BGND RGB Blue Ground
6 AIL Audio In Left + Mono 0.5V RMS >10kź
7 B RGB Blue In 0.7V Pk 75ź
8 SWTCH Audio/RGB switch/16:9 0-2V TV / 5-8V AV 4:3 / 9.5-12V AV 16:9
9 G GND RGB Green Ground
10 CLKOUT Data 2: Clockpulse Out (Unavailable ??)
11 G RGB Green In 0.7V Pk 75ź
12 DATA Data 1: Data Out (Unavailable ??)
13 R GND RGB Red Ground
14 DATAGND Data Ground
15 R RGB Red In/Chrominance 0.7V pk 0.3V burst 75ź
16 BLNK Blanking/Comp-RGB 1-3V RGB, 0-0.4V Composite 75ź
17 VGND Composite Video Ground
18 BLNKGND Blanking Signal Ground
19 VOUT Composite Video Out / Lum Y 1V Pk 75ź
20 VIN Composite In / Lum Y 1V Pk 75ź
21 SHIELD Ground/Shield (Chassis)
Cables with 1 overall screen only usable @ 50cm MAX length & will suffer some
crosstalk.
Some cables have 30ź lapped screened AF cable for video & give colour problems
as the screen is quite in inductive at 4.3MHz, proper full mesh crossed braided
screens should be used for all 75ź signal cables.
"S" input 15+20, crosstalk @ 4.43MHz in log cables causes fine patterning!
WARNING
Some VCRs (expensive JVCs) blow internal pcb fuse if the SWITCH tally wire is
shorted to ground! So watch those floating around bare screens inside the SCART
plug!
Why Don't U send an interesting bul?
73 De John, G8MNY @ GB7CIP
OĢ[ | Ģ[