Login: GUEST @ JH4XSY.14.JNET1.JPN.AS [Tsuchiura]
home | newest check | boards | help index | log | ps | userlogin | send sysop | slog | status forward | bcm news | users | version | remove cookieUT1HZM > PACKET 15.04.25 21:13l 38 Lines 1076 Bytes #1 (0) @ WW BID : 33612_UT1HZM Read: GUEST Subj: Re: BPQtoAGW.dll Path: JH4XSY<N3HYM<IW2OHX<UT1HZM Sent: 250415/1201Z 33612@UT1HZM.KREM.POL.UKR.EU BPQ6.0.24 Hi Pieter. From some time ago this DLL included inside bpq code, so no external file. Suggest you to use Soundmodem, not old AGW. http://uz7.ho.ua/packetradio.htm (no install need, just download to some folder and run, setup is easy!) For user access ports and/or forward better to use this driver: https://www.cantab.net/users/john.wiseman/Documents/UZ7HODriver.htm Its works perfect and use full power of soundmodem where used its improved internal software tnc. Also possible to use KISS driver to Soundmodem via socket (tcp) interface: https://www.cantab.net/users/john.wiseman/Documents/KISS.html Look for: KISS over TCP in above link. Also look for option KISSOPTIONS=ACKMODE In this mode Soundmodem will just take/give packets to BPQ and BPQ process them, but its even little improved over old kiss mode too. This driver also support netrom nodes broadcast/linking. 73, Sergej. > From: ZS6SPY@ZS0VTB.VTB.GAU.ZAF.AF > To : PACKET@WW > > Good day > > Trust all is well. where can I find this driver BPQtoAGW.dll please > > Thanks > best 73's > Pieter > >
前のメール | 次のメール