Login: GUEST @ JH4XSY.14.JNET1.JPN.AS [Tsuchiura]
home | newest check | boards | help index | log | ps | userlogin | send sysop | slog | status forward | bcm news | users | version | remove cookie
:::::::::::::::::
:: FLEXNET BCM ::
:::::::::::::::::
Connection between BCM and PC/Flexnet.
a) BBS and digi on same computer:
BCM BBS is connected internal via port 15 from PC/Flexnet with digi.
Parameters are: MODE 15 y - automatic sysop
P T 0 15 - set TXDelay to zero (internal link!)
P S 15 15 - add an SSID (e.g. 15)
L 15 <call>-8 @ - add BBS link entry
At BBS the parameter MYCALL must be set: MYCALL <call>-8
b) BBS and digi on different computers:
At BBS computer the channel mode (MODE, PARMS) must be set with FSET command.
—á: FSET MODE 0 19200c - CRC-KISS with 19k2 baud
FSET TXD 0 1 - TxDelay is set to 10 ms
At digi computer you set:
MODE 7 19200c - CRC-KISS with 19k2 baud
P T 1 0 - TxDelay is set to 10 ms
P S 5 5 - add an SSID (e.g. 5)
L 5 DB0ABC-8 @ - add BBS link entry
The link should be added with "L <port> <call>-8 @" at digi computer.
Note: add your local digi as via entry to your "fwd.bcm" at each path
you set, e.g.: "...AA <target> <local digi>".