Login: GUEST @ JH4XSY.14.JNET1.JPN.AS [Tsuchiura]
home | newest check | boards | help index | log | ps | userlogin | send sysop | slog | status forward | bcm news | users | version | remove cookie::::::::: :: TNC :: ::::::::: (SYSOPŚŔ’č, only DOS, option _TNC in config.h) Ť\•¶: TNC <pcflex command> You can configure PC/Flexnet with this command (change parameters). Not all PC/Flexnet commands can be used. If you don't run node (flexdigi) the changed parameters are not saved, this means they are only used until next reboot. So you should better use a batch file before starting BBS and edit FSET lines there. While BBS is normally connected via wire to node flexnet parameters have only minor importance with exception of baud rate. If running flexdigi, you should better use direct connect to setup parameters. See also HELP TNC TRACE